Fair Blue Swim Club Pool Sound System Install — Wilmington, Delaware
When Fair Blue Swim Club in Wilmington, Delaware set out to modernize its pool deck audio, they needed a pool sound system that could do far more than hum background music on a quiet afternoon. They wanted clear, powerful sound for daily music, live announcements, and swim meets — and equipment tough enough to live outdoors season after season. JD Sound and Video designed and installed a complete, professional-grade system built to handle all of it. Let’s review their pool sound system install.
The Challenge: Most Pool Speakers Can’t Handle a Live Microphone
Here’s a mistake we see at pools and swim clubs constantly: the facility buys inexpensive background-music speakers, wires them to a home-theater receiver, and calls it a day. Those speakers are voiced for low-level music only. The moment someone picks up a microphone to announce adult swim, call a meet, or clear the pool for a thunderstorm, the sound turns harsh, muddy, and unintelligible — exactly when clarity matters most.
At Fair Blue, the old setup relied on horn speakers on the poles, consumer speakers on the building, and a home-theater receiver doing a job it was never designed for. Announcements didn’t carry, and coverage across the pool was uneven.
For a swim club, intelligible announcements aren’t a luxury — they’re a safety feature. Members need to hear a lifeguard the first time, every time.
The Solution: One Pool Sound System for Music AND Announcements
We replaced the patchwork with a purpose-built commercial pool sound system centered on speakers that reproduce both music and speech beautifully — at real-world outdoor volume.
| Component | Product |
|---|---|
| Pole loudspeakers (2) | Biamp Community R.5 coaxial, weather-resistant |
| Building loudspeakers (2) | Biamp Community R.15 coaxial, weather-resistant |
| Amplifier | QSC CX1202V — fan-cooled, two-channel |
| Mixer | Rolls RM316 three-zone mixer |
| Wireless microphone | Shure BLX handheld with remote UA8 antennas |
| Input plate | Radial Engineering StageBug SB-5W (RCA + 1/8″) |
| Power distribution | Juice Goose JG Junior with surge protection |
| Equipment rack | Middle Atlantic desktop rack |
Speakers That Do Both — Biamp Community R-Series
The heart of the system is the Biamp Community R-Series, a line of professional weather-resistant loudspeakers trusted in stadiums, houses of worship, and outdoor venues.
- Poles: Two Community R.5 coaxial loudspeakers replaced the old horns. These mid-throw speakers project clean, full-range sound deep across the pool deck.
- Building: Two compact Community R.15 loudspeakers under the soffit replaced the consumer units, filling in the deck and building side.
Because these are true full-range professional speakers with real high-frequency compression drivers — not tweeter-less background boxes — they deliver crisp, intelligible speech under a live mic and rich, even music the rest of the day. Same speakers, both jobs, no compromise.
Wireless Microphone With Remote Antennas — Walk the Whole Deck
We installed a Shure BLX handheld wireless microphone system, then added remote-mounted UA8 antennas on 25-foot extensions positioned for clean line-of-sight across the pool. That means staff can carry the mic anywhere around the water — from the guard stand to the far end of the deck — and it just works, with no dropouts. Ideal for roaming meet announcing and instant safety calls.
Fan-Cooled Amplifier and a Clean, Zoned Rack
Powering the speakers is a fan-cooled QSC CX1202V amplifier. Pool equipment rooms and guard shacks get brutally hot in July — the variable-speed fan keeps the amp running cool and reliable through long summer days of continuous use, where a passively cooled consumer receiver would struggle.
Everything lives in a tidy desktop rack with a Juice Goose power-distribution/conditioner for surge protection, a Rolls three-zone mixer, and a labeled input plate with RCA and 1/8″ connections for a phone, tablet, or music source. We split the system into Poles and Building zones and clearly labeled every source — Wireless Mic, Wired Mic, Outside Input, Radio, and Inside Input — so staff can run it without a manual.
Built for the Outdoors
Every mounting detail was chosen for a wet, sunny, year-round pool environment: galvanized and stainless hardware, weather-resistant speakers, and water-blocking cable. Clean, labeled, and organized — the way we do every job, in-house, with no subcontractors.
The Result
Fair Blue Swim Club now has a single, easy-to-use pool sound system that delivers background music during the day, powerful and intelligible announcements when it counts, and even coverage across the entire pool — all built to last through Delaware summers.
Serving Delaware, South Jersey & Greater Philadelphia
JD Sound and Video designs and installs commercial sound systems for swim clubs, pools, schools, athletic facilities, houses of worship, and municipalities across Delaware, South Jersey, and the Greater Philadelphia area. As a factory-direct dealer, we specify the right equipment for the space — and the owner is on every job.
Thinking about upgrading your pool or swim club sound system install? Contact JD Sound and Video for a free consultation.
Frequently Asked Questions for Pool Sound System Install
Why can’t I just use regular speakers with a microphone at my pool?
Most background-music speakers are voiced for quiet music and lack the high-frequency drivers needed to reproduce clear speech. Under a live mic at volume, they distort and lose intelligibility. Professional loudspeakers handle both music and announcements cleanly.
What speakers are best for an outdoor pool sound system install?
Full-range, weather-resistant professional loudspeakers such as the Biamp Community R-Series. They’re rated for outdoor exposure and deliver both rich music and intelligible speech across a large pool deck.
Can staff use a wireless microphone anywhere around the pool?
Yes. With remote-mounted antennas positioned for line-of-sight coverage, staff can carry a wireless handheld mic anywhere around the pool without signal dropouts.
How long does a pool sound system installation take?
For a project of this size, the typical turnaround is about 3.5 to 5 weeks from deposit, with the on-site installation completed in roughly one day.