Houses of Worship · New Jersey · Pennsylvania · Delaware

Church Sound and Video Systems for NJ, PA and DE

Congregations across South Jersey, the Philadelphia suburbs and Delaware call us for the same reason: people in the back pews can hear the sermon but cannot understand it. We design, install and tune church sound systems that make every spoken word and every song clear, with video and projection when your services need it.
JD Sound & Video is a church AV installation company based in Voorhees, New Jersey. Since 2006 we have designed, installed and serviced audio visual systems for churches, parishes, synagogues and congregations across New Jersey, Pennsylvania and Delaware — 300-year-old sanctuaries, mid-century brick worship halls, gymnasium multipurpose rooms and new contemporary rooms with a full band. Design and installation are led by AVIXA CTS-D and CTS-I certified staff.
Our house of worship work spans Catholic and Episcopal parishes, Methodist, Baptist, Presbyterian, Orthodox and non-denominational churches, and synagogues. Traditional liturgy and contemporary worship need different systems, and we design for the way your services actually run.
Worship rooms are some of the hardest rooms to get right. Hard parallel surfaces, long reverberation, a balcony, a choir loft, open microphones on a platform, and volunteers who have to run the whole thing on Sunday morning. A system that measures well on paper and fails in that room is not a system. We design for the room you actually have, then we tune it and teach your team to use it.
Everything below is what we do, what it realistically costs, and what your committee will want to ask. If you would rather just talk it through, see all of our commercial AV services or bring us in as an AV consultant before you write a specification.
Smaller congregation? Our small church sound systems page covers chapels and sanctuaries up to about 300 seats, with typical systems from $8,000 to $16,000.

Custom Sound System Design for Clear Sermons & Music

Intelligibility first. Every other decision follows from it.
The complaint is almost always the same: “we can hear it, but we cannot understand it.” That is not a volume problem, and turning the system up makes it worse. In a reverberant sanctuary, a loudspeaker that sprays sound at the side walls and ceiling arrives at the listener late and smeared. We design to a measurable speech intelligibility (STI) target, and we choose coverage patterns that put energy on the congregation and keep it off the hard surfaces.
That usually means steerable column arrays or a tightly pattern-controlled point source rather than the pair of horn-loaded boxes hung in 1994. Where the room itself is the problem, we say so, and we address decay time with acoustic treatment instead of selling you more speakers that will only excite the room further.
Open microphones matter just as much. Every time the number of live microphones doubles you give up roughly 3 dB of gain before feedback, which is why a lavalier, an ambo microphone, a choir pair and a band all live on the same platform without ringing only when the DSP, the gain structure and the microphone choices were planned together.

Equipment We Install in Churches

We are brand-agnostic and choose equipment for the room, but these are the manufacturers in the church systems we have already delivered: QSC and Allen & Heath mixing and DSP, JBL CBT column speakers, EAW and Danley loudspeakers, Crown amplification, Shure wired and wireless microphones, and Crestron control. Every system is designed around parts we can support for the long term.
Steerable JBL CBT column loudspeakers installed for a church sound system

Sanctuaries across NJ, PA and DE

Parishes, Methodist and Baptist congregations, Orthodox churches, and synagogues — from Eddystone to Hammonton to Wilmington.

House of Worship Video Systems

Lyrics people can read from the back row, and a control surface a volunteer can run without a phone call.

Projection and Display

Most church projectors are too dim. A sanctuary with clear windows and 3,000 lumens on a screen is a grey rectangle by 10 a.m. We size brightness against the real ambient light and screen size — commonly 6,000 lumens and up for a laser projector in a lit room — or we drop projection entirely in favor of commercial displays or direct-view LED where sightlines and daylight demand it. Confidence monitors for the pastor and the worship team are part of the design, not an afterthought.

Video Control for Volunteers

The best system is the one that still works when the person who knows it is away. We build simple control — a wall panel or touchscreen with labeled scenes for Sunday service, funeral, concert and off — so nobody has to remember a signal path. Then we train your team, in your room, on your system, and leave documentation behind. More on video systems →

Assistive Listening Is Usually Required, Not Optional

Worship spaces are frequently exempt from the ADA, which is why so many sanctuaries have nothing. The building code is a different question. New Jersey’s adopted IBC (§1109.2.7) and Pennsylvania’s (§1108.2.7) both require assistive listening in assembly spaces with audio amplification, with receiver counts that scale to seating capacity and a share of them hearing-aid compatible.
In practice that means an RF or infrared receiver system, or a hearing loop where you want people to use their own hearing aids with no equipment to hand out. We specify it, we count receivers against your seat count, and we post the signage. More on assistive listening systems →
Equipment rack for a church sound system installation

Worship Lighting, Where It Helps

Lighting is a smaller part of what we do, and we treat it that way. If your pastor is underlit, or the platform looks flat from the back rows, a modest front-light and platform wash fixes it for a fraction of what a theatrical rig costs. We will tell you when lighting is the cheapest improvement to your video, and when it is not worth the money yet. Lighting installation →

How Much Does a Church Sound and Video System Cost?

Here are our working ranges, so you can budget before you invite three companies to quote.
Sound only
$15,000 – $50,000
Typical installed range, NJ / PA / DE
Loudspeakers, amplification, DSP, mixing console, wireless microphones, cabling and commissioning for a single sanctuary. Small rooms and straightforward retrofits land at the bottom of the range; large or reverberant rooms, balconies, choir and band coverage push toward the top.
Sound + video
$30,000 – $100,000
Typical installed range, NJ / PA / DE
Everything above plus projection or displays, confidence monitors, and simple volunteer control. Direct-view LED, multi-room distribution or a second campus sits above this range.
Three things move a church budget more than brand choice. First, the room: reverberation decides the loudspeaker, and the loudspeaker decides a large share of the cost. Second, how many microphones are open at once. Third, whether the existing infrastructure — conduit, cable paths, rigging points, electrical — can be reused. Equipment is only part of the price; design, labor, rigging, programming, tuning and training are the rest. For a full breakdown, see our church sound system cost guide.
We also phase work when the budget is not there yet. A common sequence is speech audio first, then projection and displays. And we will tell you when a repair or a partial upgrade beats a replacement — that answer costs you nothing and it happens more often than you would think.
Planning for a smaller sanctuary or chapel? See small church sound system options and pricing →

How a Church AV Installation Works

1

Free On-Site Assessment

We visit during or around a service, listen in the room, check sightlines, wiring paths and existing equipment, and hear what your team needs.
2

Design and Written Proposal

A line-item proposal with real numbers, coverage and display decisions explained, and options to phase the work if the budget needs it.
3

Installation and Tuning

Scheduled around your worship calendar, weddings and funerals. Every system is measured, tuned and documented before we hand it over.
4

Volunteer Training and Support

We train your team on your system in your room, leave labeled presets and notes, and answer the phone when something goes wrong before Sunday.

What Churches and Clients Say

C
Chuck Messer
Small congregation, Salem County, NJ
July 2022
As a small congregation in Salem County, we looked to expand our reach with improved livestreaming capabilities and enhanced sound. We had no clue what we needed so by chance I came upon JD Sound. Immediately, I felt secure talking over our needs and didn't take much for our vestry to get on board. I felt their proposal was fair and their installation was done professionally and carefully in our 300 year old sanctuary. Learning the software and successfully livestream had a learning curve, but Oliver (amazing tech) was very patient with us in our personal training they provided. They still provide us with insight and troubleshooting. I highly recommend working with JD Sound & Video.
S
Sam Mountain
Asbury United Methodist Church, Woodstown, NJ
June 2021
Asbury United Methodist Church in Woodstown, NJ, sends a big thank you and job well done to JD Sound & Video. The entire staff is first class and very knowledgeable. They continually worked with us through the whole process of an audio upgrade and a new video streaming system for our church. Their customer service is second to none. Thanks again to the owner Joe, and his entire team!
A
Alex Shourds
Kingsway Church
June 2022
We at Kingsway Church reached out to quite a few companies to have someone come check some rigging that was done for our speakers in one of our campuses. We did not get many responses but JD Sound and Video got back to us right away! They came out super quick and did a thorough inspection of our speaker system to confirm everything was good! We were very impressed with their customer service and expertise and will definitely be using them again for future projects!
T
Timothy Lawrence
July 2021
JD Sound & Video is by far one of the best investments our ministry has made, from beginning to end doing business with JD Sound & Video has been amazing. The technicians were very professional and knowledgeable and I could easily tell that they were passionate about what they do.
D
Dan Antonelli
July 2026
Sound board was down and graduation was the next day. I made a call and a rep was helping while waiting for a flight then a tech was out there in 25 minutes. These guys are top notch and sound is great!

Church Sound and Video: Frequently Asked Questions

Everything from a 60-seat chapel to a multi-campus church with a full band and a livestream team. We scope small congregations honestly — a small room does not need a large system, and we will not sell you one.
New Jersey, eastern and southeastern Pennsylvania including the greater Philadelphia area, and Delaware. We are based in South Jersey, so Camden, Gloucester, Burlington, Salem, Atlantic and Cumberland counties, Delaware County and Philadelphia, and New Castle County are all routine service territory for us.
No. The initial on-site assessment and the system proposal are free. If a project needs formal engineering deliverables — acoustic modeling, coverage plots, signal-flow drawings, rack elevations for a bid set — we will tell you before any of that starts.
In our region, a sound-only sanctuary system typically runs $15,000 to $50,000 installed, and a sound and video package typically runs $30,000 to $100,000. Room size, reverberation, the number of open microphones and how much existing wiring can be reused move a project within those ranges. Our church sound system cost guide explains what drives the price.
Sanctuary sound systems, digital mixing consoles and DSP, wired and wireless microphone systems, distributed audio for overflow and fellowship spaces, assistive listening, projection and commercial displays, direct-view LED, confidence monitors, simple volunteer control systems, and acoustic treatment.
Often, yes. Amplifiers, cabling, conduit, rigging points and racks frequently have life left in them, and replacing only the loudspeakers or only the console is sometimes the whole fix. We look at what you have before we quote anything new, and we say plainly when a repair beats a replacement.
For most churches: digital wireless handhelds and headsets for whoever moves around, a gooseneck at the pulpit or ambo, and wired microphones for choir and instruments. The right mix depends on how many microphones are open at once and how live the room is. Every time the number of open microphones doubles you lose roughly 3 dB of gain before feedback, so we plan the microphone complement, the wireless frequency coordination, the antenna placement and the DSP together rather than picking a model from a catalog.
Yes — RF and infrared receiver systems, and hearing loops where you want people to use their own hearing aids with nothing to hand out and nothing to charge.
Generally yes for assembly spaces with audio amplification. New Jersey’s adopted IBC §1109.2.7 and Pennsylvania’s §1108.2.7 both require assistive listening in amplified assembly spaces, with receiver counts scaling to seating capacity and a portion hearing-aid compatible. This is separate from the ADA, which frequently exempts houses of worship. Your local code official has the final word, and we are glad to talk to them.
That is a design requirement, not a hope. We build labeled scenes and simple control — a wall panel or touchscreen with presets for Sunday service, funeral, concert and off — then we train your team on your system in your room, and we leave documentation behind.
It depends on ambient light. A projector needs enough brightness for your screen size and your windows, which in a lit room usually means 6,000 lumens or more from a laser projector. Where daylight is heavy or sightlines are awkward, commercial displays or direct-view LED cost more up front and simply work. We measure the room rather than guess.
Usually both, and the order matters. If reverberation time is long, a new loudspeaker with poor pattern control will excite the room just as badly as the old one. We assess decay time and coverage together, and sometimes the cheaper and better answer is absorption first, loudspeakers second.
Most single-sanctuary projects install in a few days to two weeks on site, scheduled around your worship calendar, weddings and funerals. Lead time before that depends on equipment availability. When a room cannot be taken out of service, we plan the work around it.
Choose the company that measures the room, puts a line-item proposal in writing, trains your volunteers and answers the phone after the install. Ask four questions. Will they measure the room before they recommend equipment? Will they give you a written, line-item proposal you can compare? Who trains your volunteers, and who answers the phone the Saturday before Easter? And who designs the system — our design and installation are led by AVIXA CTS-D and CTS-I certified staff. We are glad to give you references from churches near you.
Yes. We support what we install, and we service systems other companies installed. When something fails before a service or a funeral, call us and we will make it a priority.

Get a free church AV assessment

Tell us what is not working on Sunday morning. We will come out, listen in the room, and give you a written proposal with real numbers — no charge, no obligation.
◉Serving NJ, PA and DE — based in Voorhees, NJ
Request a quote
Drag & Drop Files, Choose Files to Upload You can upload up to 10 files.
If you have any drawings, plans or photos to share, please upload them here.
Prefer to talk now? Call 800-650-5378 and ask for Joe.
We regularly work in Camden, Gloucester, Burlington, Salem, Atlantic, Cumberland, Mercer and Monmouth counties in New Jersey; Philadelphia, Delaware, Montgomery, Bucks and Chester counties in Pennsylvania; and New Castle and Kent counties in Delaware. About JD Sound & Video · Certifications · AV service and maintenance · Contact us